€179.00 *
Available, delivery time: 5 days
- Product number:: 33860205 |
- EAN: 4057204332723 |
- Manufacturer: HELIX
Rich deep bass from compact dimensions
The drivers of the K-Subwoofer series all allow for use in very compact enclosures in which they deliver exceptional bass performance. Especially when it comes to optimally utilizing the available space in the vehicle through a custom subwoofer enclosure design, these woofers open up entirely new possibilities without having to make any acoustic compromises. Clever down to the last detail. The extremely rigid diaphragm made of hand-crafted paper fibers, combined with the high-performance drive system, not only effortlessly converts amplifier power into powerful sound pressure without compression effects, but also scores highly in terms of sound quality with subtle beats. Maximum connection flexibility – 2 x 2 or 1 x 2 ohms. The K-series subwoofer drivers are available with a 1 x 2 ohm voice coil (SVC2) or alternatively with a 2 x 2 ohm dual voice coil (DVC2). Thus, for every conceivable amplifier configuration – whether monoblock, two-channel power amplifier, or multi-channel amplifier – there is always a suitable woofer to extract maximum performance.
“All inclusive” for the DIY enthusiast
A solid protective grille and a cover ring are, of course, included in the scope of delivery.
For optimal bass performance in DIY installations, our technical data sheet provides recommendations for sealed and bass-reflex enclosures with all parameters such as net volume, port tuning frequency, and DSP settings.
Features
- Enormously torsionally rigid, hand-molded paper cone
- Double voice coil ventilation for minimal compression effects
- Long-throw rubber surround for maximum mechanical durability
- Very large linear excursion
- 1 x 2 Ohm voice coil
- Solid push-button terminals
- Powerful magnet system optimized for compact bass-reflex enclosures
- Robust magnet cover with HELIX logo to protect the magnet
- Grille and cover ring included
Technical specifications
| K 10W SVC2 – 1 x 2 Ohm | ||
| RMS / Max. power | P | 300 / 600 Watts |
| Impedance | Z | 1 x 2 Ω |
| DC resistance | Re | 1 x 2.0 Ω |
| Resonance frequency | Fs | 32 Hz |
| Mechanical quality | Qms | 5.09 |
| Electrical quality | Qes | 0.45 |
| Overall quality | Qts | 0.41 |
| Compliance | Cms | 159 μm/N |
| Equivalent volume | Vas | 25 L |
| Power factor | B*I | 12.1 Tm |
| Efficiency 1 W / 1 m | SPL | 87.0 dB |
| Membrane Area | Sd | 333 cm² |
| Moving Mass | Mms | 126 g |
| Membrane Material | Handmade Paper Membrane | |
| Mechanical Resistance | Rms | 6.25 kg/s |
| Voice coil diameter | ø | 50.8 mm |
| Voice coil winding width | 24 mm | |
| Max. linear diaphragm excursion | Xmax | +/- 8.0 mm |
| Outer diameter | ø | 262 mm |
| Installation diameter | ø | 232 mm |
| Installation depth | 126 mm | |
| Recommended housing volumes | ||
| Closed Enclosure | ||
| Net Volume | 15 L | |
| Lower Cutoff Frequency (-3dB) | 50 Hz | |
| Recommended DSP Settings | “Self-Define” High-Pass: 38 Hz / Q = 1.4; EQ Filter: 95 Hz / Q = 1.0 / -3 dB | |
| Bass reflex housing | ||
| Net volume | 21 L | |
| Reflex channel diameter | ø | 70 mm |
| Reflex channel area | 38 cm² | |
| Reflex channel length | 32 cm | |
| Tunnel tuning frequency | Fb | 36 Hz |
| Lower cutoff frequency (-3dB) | 36 Hz | |
| Recommended DSP settings | “Self-Define” high-pass filter: 35 Hz / Q = 1.0; EQ filter: 100 Hz / Q = 0.7 / -2 dB | |
Scope of delivery
1 x Subwoofer HELIX K 10W [SVC2]
1 x Grille
1 x Cover ring
1 x Datasheet
| Weitere Spezifikationen | |
|---|---|
| LS-Bauart | Subwoofer |
| LS-Bauart | Einzellautsprecher |
| LS-Belastbarkeit | 101-200 Watt RMS über 200 Watt RMS |
| LS-Größe | 250 mm |
| LS-Impedanz | 2 Ohm |
| LS-Lautsprechergröße | 25 cm |
| Fahrzeughersteller | Universell |
Similar Products
















