€99.00 *
Free shipping
Available, delivery time: 5 days
- Product number:: 33860534 |
- EAN: 4057204332709 |
- Manufacturer: Audiotec Fischer
Rich deep bass from compact dimensions
The drivers of the IK subwoofer series allow for use in very compact enclosures where they deliver exceptional bass performance. Especially when it comes to optimally utilizing the available space in the vehicle through a custom subwoofer enclosure design, these woofers open up entirely new possibilities without having to compromise on acoustics.
Clever down to the last detail
The extremely rigid diaphragm made of hand-crafted paper fibers, combined with the high-performance drive system, not only effortlessly converts amplifier power into powerful sound pressure without compression effects, but also scores highly with subtle beats.
Flexible connection
Thanks to the 1 x 2 Ohm (SVC2) or 2 x 2 Ohm (DVC2) versions, the right low-bass specialist can be found for every amplifier configuration to extract maximum performance.
"All inclusive" for the DIY enthusiast
For optimal bass performance in DIY installations, our technical data sheet provides recommendations for sealed and Bass reflex enclosure with all parameters such as net volume, port tuning frequency, and DSP settings. A solid protective grille and a cover ring are, of course, included.
Features
- 2 x 2 Ohm dual voice coil for flexible system configurations
- Powerful magnet system optimized for compact bass reflex enclosures
- Enormously torsionally rigid, hand-molded paper cone
- Dual voice coil ventilation for minimal compression effects and high power handling
- Long-throw rubber surround for maximum mechanical durability
- Gold-plated terminals for maximum conductivity
- Robust magnet cover with HELIX logo to protect the magnet
- Grille and cover ring included
Technical Specifications
| IK W6-DVC2 – 2 x 2 Ohm | ||
| Load capacity RMS / Max. | P | 150 / 300 Watt |
| Impedance | Z | 2 x2 Ω |
| DC resistance | Re | 2 x 2.0 Ω |
| Resonance frequency | Fs | 50 Hz |
| Mechanical quality | Qms | 3.92 |
| Electrical quality | Qes | 0.32 |
| Overall quality | Qts | 0.30 |
| Compliance | Cms | 261 μm/N |
| Equivalent volume | Vas | 5.3 L |
| Force factor | B*I | 12.3 Tm |
| Efficiency | SPL | 89.0 dB @ 2.83V / 1m 86.0 dB @ 1W / 1m |
| Membrane area | Sd | 123 cm² |
| Moving mass | Mms | 37 g |
| Membrane material | Handmade paper membrane | |
| Mechanical resistance | Rms | 3.04 kg/s |
| Voice coil diameter | ø | 37 mm |
| Voice coil winding width | 18 mm | |
| Max. linear diaphragm stroke | Xmax | +/- 6.0 mm |
| Outer diameter | ø | 164.2 mm |
| Installation diameter | ø | 132.5 mm |
| Installation depth | 74.3 mm | |
| Enclosure recommendation | ||
| Bass reflex enclosure | ||
| Net volume | 7 L | |
| Reflex channel diameter | ø | 50 mm |
| Reflex channel area | 20 cm² | |
| Reflex channel length | 34 cm angled | |
| Tunnel tuning frequency | Fb | 45 Hz |
| Lower cutoff frequency (-3dB) | 43 Hz | |
| Recommended DSP Settings | Recommended "Self-Define" high-pass filter with 45 Hz cutoff frequency and Q = 1.2; Additional EQ filter 80 Hz / Q = 1.0 / +1.0 dB |
Scope of Delivery
1 x Subwoofer HELIX IK W6-DVC2
1 x Grille
1 x Cover Ring
1 x Datasheet
| Weitere Spezifikationen | |
|---|---|
| LS-Bauart | Subwoofer |
| LS-Bauart | Einzellautsprecher |
| LS-Belastbarkeit | 101-200 Watt RMS über 200 Watt RMS |
| LS-Größe | 160-165 mm |
| LS-Impedanz | 2x2 Ohm |
| LS-Lautsprechergröße | 16 cm |
| Fahrzeughersteller | Universell |
Similar Products









