€219.00 *
Available in 1 day, delivery time 5 days
- Product number:: 33861000 |
- EAN: 4057204324025 |
- Manufacturer: Audiotec Fischer
Sovereign Bass Performance from Compact Dimensions
The IMPACT subwoofer line, with its new KW single drivers, offers powerful bass solutions for use in very compact enclosures. Especially when it comes to optimally utilizing the available space in the vehicle through a custom subwoofer enclosure design, these woofers open up entirely new possibilities without having to make any acoustic compromises.
Clever Down to the Last Detail
The extremely rigid diaphragm made of hand-crafted paper fibers, in conjunction with the high-performance drive system, not only effortlessly converts amplifier power into powerful sound pressure without compression effects, but also delivers equally impressive sound with subtle beats.
Flexible Connection – 2 x 2 or 1 x 2 Ohms
The drivers are available as either a 1 x 2 Ohm (SVC2) or 2 x 2 Ohm (DVC2) variant. Thus, for every conceivable amplifier configuration – whether monoblock, two-channel power amplifier, or multi-channel amplifier – there is always a suitable woofer to extract maximum performance. "All-inclusive" for self-made enthusiasts. A solid protective grille and a cover ring are, of course, included in the scope of delivery. For optimal bass performance in DIY installations, our technical data sheet provides recommendations for sealed and bass-reflex enclosures with all parameters such as net volume, port tuning frequency, and DSP settings.
Features
- 1 x 2 Ohm voice coil
- Extremely torsionally rigid, hand-molded paper cone for exceptional impulse response
- Dual voice coil ventilation for minimal compression effects and high power handling
- Long-throw rubber surround for maximum mechanical durability
- Solid push-button terminals
- Powerful magnet system optimized for compact enclosures
- Robust magnet cover with HELIX logo to protect the magnet
- Grille and cover ring included
Technical Data
| IK W12-SVC2 - 1 x 2 Ohm | ||
| Load capacity RMS / Max. | P | 300 / 600 watts |
| Impedance | Z | 1 x 2 Ω |
| DC resistance | Re | 1 x 2.0 Ω |
| Resonance frequency | Fs | 31 Hz |
| Mechanical quality | Qms | 4.03 |
| Electrical quality | Qes | 0.54 |
| Overall quality | Qts | 0.47 |
| Compliance | Cms | 142 μm/N |
| Equivalent volume | Vas | 53 L |
| Force factor | B*I | 11.9 Tm |
| Efficiency | SPL | 95.0 dB @ 2.83V / 1m |
| Membrane area | Sd | 515 cm² |
| Moving mass | Mms | 146 g |
| Membrane material | Handmade paper membrane | |
| Mechanical resistance | Rms | 9.20 kg/s |
| Voice coil diameter | ø | 50.8 mm |
| Voice coil winding width | 24 mm | |
| Max. linear diaphragm stroke | Xmax | +/- 8.0 mm |
| Outer diameter | ø | 316 mm |
| Installation diameter | ø | 286 mm |
| Installation depth | 144 mm | |
| Recommended housing volumes | ||
| Closed housing | ||
| Net volume | 22 L | |
| Lower cutoff frequency (-3dB) | 40 Hz | |
| Recommended DSP settings | “Self-Define” high pass: 37 Hz / Q = 1.5; EQ filter: 80 Hz / Q = 1.3 / -3 dB | |
| Bass reflex enclosure | ||
| Net volume | 40 L | |
| Reflex channel diameter | ø | 100 mm |
| Reflex channel area | 78 cm² | |
| Reflex channel length | 35 cm | |
| Tunnel tuning frequency | Fb | 34 Hz |
| Lower cutoff frequency (-3dB) | 37 Hz | |
| Recommended DSP settings | “Self-Define” high-pass filter: 34 Hz / Q = 0.8; EQ filter: 80 Hz / Q = 0.7 / -2 dB | |
Scope of delivery
1 x Subwoofer HELIX IK W12-SVC2
1 x Protective grille
1 x Cover ring
1 x Datasheet
| Weitere Spezifikationen | |
|---|---|
| LS-Bauart | Subwoofer |
| LS-Bauart | Einzellautsprecher |
| LS-Belastbarkeit | über 200 Watt RMS |
| LS-Impedanz | 2 Ohm |
| LS-Lautsprechergröße | 30 cm |
| Fahrzeughersteller | Universell |
Similar Products


















