VW T6.1 with standard sound | 8-channel premium DSP sound upgrade | SPC-106T61 | K8E² Sub | Premium insulation

The premium sound upgrade kit, specifically designed for your Volkswagen T6.1 Bulli, fits all variants of the popular new-generation VW bus. The major advantage of using an 8-channel DSP amplifier, compared to passive operation with a 5-channel amplifier, lies in the ability to adjust each individual speaker. This allows for optimal sound tuning and optimization for each speaker. The kit includes the Alpine VW T6.1 plug-and-play speaker system (active version), a comprehensive sound deadening package for the front doors, a custom-tuned HELIX K8E² subwoofer, and an 8-channel MATCH UP8 DSP amplifier with approximately 650 watts RMS power, specifically calibrated for the T6.1 interior and speaker setup. This amplifier connects to the car radio/navigation system using the included plug-and-play wiring harness, making installation very simple. Only the power supply cables to the battery and the tweeter and subwoofer cables need to be routed. The subwoofer, based on the Audiotec Fischer Helix K8E², is modified and fits perfectly into the seat console of a VW T6.1 bus. It is the best example of how an intelligent interplay of amplifier and speaker, thanks to sophisticated DSP technology, can provide rich, palpable bass pressure in the vehicle, even with extremely compact dimensions. The functionality of any original swivel seat is not affected. The package includes all mounting hardware for repositioning the original components, as well as receptacles for the original connectors, whose holders must be removed to save space. The optional wired remote control allows switching between two pre-installed sound setups.

Features:

DSP Amplifier Match Up8 DSP:

• Power RMS / Max. 6 x 65 Watts / 6 x 130 Watts
• Subwoofer Output RMS / Max. 2 x 90 / 180 Watts @ 4Ω, 2 x 160 Watts / 320 Watts @ 2Ω
• Class GD technology with dynamically regulated power supply, 32-bit coprocessor, ADEP.3 circuit, start-stop capability, smart control port, USB, MEC slot, auto remote switch, galvanically isolated line out
• Dimensions (H x W x D) 46 x 130 x 153 mm
• Delivery includes sound setup file (pre-installed) for the VW T6.1 Bus

Speaker system:

• 16 cm vehicle-specific woofer
• 28 mm tweeter with three mounting points for VW T6.1
• Stylish grille for the tweeter
• 3 Ohm impedance
• Power handling: 70 Watts RMS
• Incl. mounting rivets
• Adapted for active operation (Uses four channels of the DSP amplifier)

Subwoofer:

• Power RMS / Max. 300 / 800 Watts
• Max. Linear diaphragm excursion +/- 6.5 mm Efficiency 1 W / 1 m 87 dB Dimensions (H x W x D) 189 x 340 x 310 mm Extremely compact housing - ideal for the VW seat console Optimized for MATCH Plug & Play Amplifier
• a 20cm long-throw woofer with hand-molded paper cone and dual voice coil
• Double voice coil ventilation for minimal compression effects
• High-power voice coils with large winding widths
• Easiest connection via pre-assembled subwoofer cable
• Solid metal grille for optimal woofer protection
• Adapted to the installation conditions in the VW bus

Scope of delivery:

• Alpine SPC-106T61 vehicle-specific speaker system, suitable for VW T6.1 bus, adapted for active operation
• 3 x optional 2.2mm aluminum butyl damping mats
• 2 x optional 10mm foam mats
• 1 x MATCH UP8 DSP 8-channel amplifier, Pre-configured and programmed for your T6.1 (2 x sound setup)
• 1 x Plug & Play cable set for easy amplifier connection
• 1 x power cable set
• 1 x HELIX K8E² subwoofer, adapted to the T6.1 console
• 1 x Plug & Play subwoofer connection cable
• 1 set of holders for the original factory wiring connectors
• 1 x removal lever each for safe removal of the trim panels