VW T6 with standard sound | 5-channel DSP sound upgrade | PP8E-Q subwoofer | Eton UG VW T6 | Insulation

The sound upgrade kit, tailored for your Volkswagen T6 Bulli, fits all variants of the popular T6 bus. Included in the kit are the Eton 2-way plug-and-play speaker system UG VW T6 F2.1, a soundproofing package for the front doors, the Match PP-8 subwoofer, and a 5-channel Match DSP amplifier with approximately 350 watts RMS power, specifically calibrated for the T6 interior and speaker setup. This amplifier connects to the car radio/navigation system using the included plug-and-play wiring harness, making installation incredibly easy.

The subwoofer, based on the Audiotec Fischer Match PP-8E-Q, has been modified and fits perfectly into the seat console of a VW T6 bus. It is the best example of how an intelligent interplay between amplifier and speaker, thanks to sophisticated DSP technology, can deliver rich, palpable bass even in extremely compact dimensions.

Any swivel seat will not be affected. Included in the delivery are all the necessary mounting hardware for repositioning the original components, a mounting plate for securing the housing in the console, and two holders for the original connectors, whose holders must be removed due to space constraints. With the optionally available wired remote control, you can switch between optimized sound setups.

Features:

DSP Amplifier Match M 5.4DSP:

• Power RMS / Max. 4 x 35 Watts / 4 x 70 Watts (Standard Mode), 4 x 60 Watts / 4 x 120 Watts (High-Power Mode)
• Subwoofer Output RMS / Max. 1 x 90 Watts / 180 Watts @ 4Ω, 1 x 120 Watts / 240 Watts @ 2Ω (Standard and High-Power Mode)
• 32-bit Coprocessor, ADEP.3 Circuit, Auto Remote Switch, Control Input, Stereo Line Out, Start-Stop Capability, USB Control Input
• Dimensions (H x W x D) 35 x 85 x 110 mm
Delivery includes sound setup file (pre-installed) for VW T6 bus. Subwoofer technical data: RMS / Max. power: 200 / 400 watts. Impedance: 4 x 2 Ω. Max. Linear diaphragm excursion +/- 6.5 mm
• Efficiency 1 W / 1 m 87 dB
• Dimensions (H x W x D) 189 x 340 x 310 mm

Speaker system:

• 20 cm vehicle-specific woofer
• 28 mm tweeter with three mounting points for VW T6
• 3 Ohm impedance
• Power handling: 120 Watts RMS

Technical data speaker system

• Power RMS / Max. 120/ 200 Watts
• Impedance 2 x 3 Ω
• Max. Linear diaphragm excursion +/- 5.5 mm (woofer)
• Efficiency 1 W / 1 m 93 dB

Subwoofer:

• Extremely compact enclosure - ideal for the VW seat console
• Optimized for MATCH Plug & Play Amplifier
• a 20cm long-throw woofer with hand-made paper cone and dual voice coil
• Double voice coil ventilation for minimal compression effects
• High-power voice coils with large winding widths
• Easiest connection via pre-assembled subwoofer cable
• Solid metal grille for optimal woofer protection
• Adapted to the installation conditions in the VW bus

Subwoofer Technical Specifications:

• Power RMS / Max. 200 / 400 Watts
• Impedance 4 x 2 Ω
• Max. Linear diaphragm excursion +/- 6.5 mm
• Efficiency 1 W / 1 m 87 dB
• Dimensions (H x W x D) 189 x 340 x 310 mm

Scope of delivery:

• UG VW T6 F2.1 vehicle-specific speaker system, suitable for VW T6 bus
• 2 x Option aluminum butyl damping mat 2.2 mm
• 2 x Option damping foam mat 10 mm
• 1 x Match M5MkII DSP amplifier, pre-configured and programmed for your T6 (sound setup)
• 1 x Plug & Plug & Play wiring kit for easy amplifier connection
• 1 x MATCH PP 8E-Q subwoofer, adapted to the T6 console
• 1 x MATCH PP-SC 48 plug & play subwoofer connection cable (4.80 meters)
• 2 x holders for original factory wiring connectors
• 1 x removal lever each for safe removal of trim panels