Retrosound San Diego with DAB+, black

The new "San Diego" is RetroSound's first car radio with DAB+ radio, Bluetooth hands-free calling, A2DP audio streaming, and Apple iPod/iPhone control. The new push-button operation is a true breakthrough in sound systems for classic cars. Naturally, the "San Diego" also features RetroSound's flexible, patented "InfiniMount" mounting system and control knobs. With this single device, you retain the classic car's design without sacrificing modern digital media. Two USB and two AUX inputs on the rear panel allow you to connect external MP3 players, such as an iPod or DAB+ receiver. Any concerns that installing a RetroSound car radio might jeopardize your historic vehicle registration are unfounded. The download contains a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma and the RetroSound San Diego, including vehicle-specific trim and control buttons, may be installed in classic cars with H-plates and do not prevent the issuance of H-plates!

VERSION
Black display with black pushbuttons (without front panel, without control knobs*)

FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Available in authentic pushbutton styling in ivory, chrome, or black
- Apple iPod/iPhone control
- Bluetooth hands-free calling with A2DP audio streaming
- Adjustable LCD backlight with 32,000 different colors
- FM/AM radio receiver with RDS and 30 station presets
- Switchable radio frequencies (USA/EUROPE)
- New control system with knob and ring functionality
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- Three pairs of RCA outputs for external amplifiers
- Patented "InfiniMount" mounting system and control knobs
- Compatible with all RetroSound front panels and control knobs
- 3 equalizer presets plus individual bass/treble/fader/balance adjustments
- E-mark e13 03 10006 e13*72/245*2006/96*10006*00
- XBAS loudness function
- Auto reset to factory settings after 5 minutes without power

EXPANSION OPTIONS
- 2 USB inputs (rear panel)
- 2 AUX inputs (stereo)
- 3 RCA outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate power lead for motorized antenna and amplifier


FM
- European Broadcasting frequency range with RDS 87.5-107.9 MHz
- External antenna connection
- Sensitivity 12.5 dBf
- Station separation 75 dB at 400 kHz
- Signal-to-noise ratio 62 dB
- Distortion at 1 kHz 0.8% (stereo) 0.5% (mono)
- Channel separation 32 dB at 1 kHz
- Frequency response 30-16000 Hz

MW
- Frequency range 530-1710 kHz
- External antenna connection

IPOD/IPHONE COMPATIBILITY
- iPhone 5 to XS (Lightning USB cable required)
- iPhone 3G up to 4s (30-pin USB cable required)
- iPod touch 2G to 3G (30-pin USB cable required)
- iPod nano 3G to 6G (30-pin USB cable required)
- iPod classic 80-160GB (30-pin USB cable required)

GENERAL DATA
- Control unit dimensions: 89 x 38 x 27 mm
- Radio unit dimensions: 101 x 51 x 136 mm
- Power supply: 10.5 to 14.4 volts
- Maximum current draw: 15 amps
- Standby current: 3.5 mA
- Output power: 12V, 4 ohms, <1% THD: 4 x 15 watts RMS
- Speaker impedance: 4-8 ohms
- RCA outputs: 4 channels, 2.85 volts
300 mV / 6 kOhm
- Input sensitivity AUX2 > 300 mV / 6 kOhm

LEGAL NOTICE
iPod and iPhone are trademarks of Apple Computer, registered in the U.S. and other countries. To achieve optimal results, Apple has established certain compatibility requirements for accessory manufacturers. Products designed and certified as compatible will have the "Made for" marking on their packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories labeled "Made for" your device (see below). "Made for iPod" means that an electronic accessory is specifically designed for connection to the iPod and has been certified by the developer to meet Apple performance standards. "Made for iPhone" means that an electronic accessory is specifically designed for connection to the iPhone and has been certified by the developer to meet Apple performance standards. 6-Volt Electrical Systems: You will need a voltage converter if you wish to operate a RetroSound car radio in a vehicle with a 6-volt electrical system. We recommend the Statron 2238.0 DC/DC converter (www.statron.de) in such a case.

E-APPROVAL
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00

*IMPORTANT NOTE
Please order a vehicle-specific front panel with control knobs for your car separately. This is not included with the car radio.