Retrosound San Diego with DAB+ car radio, chrome/black

RETROSOUND "SAN DIEGO" DAB+ classic car radio with chrome display frame and black pushbuttons.
The control knobs and rear control rings must be ordered separately.

It features Bluetooth hands-free calling, A2DP audio streaming, and Apple iPod/iPhone control. Touchscreen operation of the Apple iPod/iPhone remains active. Naturally, the "MOTOR-6" radio module also features RetroSound's flexible, patented "InfiniMount" mounting system and control knobs. With this device, you retain the classic car's design without sacrificing modern digital media. Two USB and two AUX inputs on the rear panel allow you to connect external MP3 players, such as an iPod or DAB+ receiver.

Any concerns that installing a RetroSound car radio might jeopardize your historic vehicle registration are unfounded. The download contains a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma and the RetroSound Model Two, including vehicle-specific cover and control buttons, may be installed in classic cars with H-plates and do not prevent the issuance of H-plates!

FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Apple iPod/iPhone control (touchscreen operation of the Apple iPod/iPhone remains active)
- Bluetooth hands-free calling with A2DP audio streaming
- Adjustable LCD backlight with 32,000 different colors
- DAB+/FM/AM radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- 3 stereo RCA outputs for external amplifiers (front/rear/subwoofer)
- 2-year manufacturer's warranty
- 3 equalizer presets plus individual bass/treble/fader/balance adjustment
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00
- XBAS Loudness function
- Auto reset to factory settings after 5 minutes without power

EXPANSION OPTIONS
- 2 USB inputs (rear of unit)
- 2 AUX inputs (stereo)
- 3 RCA outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate power-on lead for motorized antenna and amplifier

TECHNICAL DATA

FM
- European broadcast frequency range with RDS 87.5-107.9
- External antenna connection
- Sensitivity 12.5 dBf
- Transmitter separation 75 dB at 400 kHz
- Signal-to-noise ratio 62 dB
- Distortion at 1 kHz 0.8% (stereo) 0.5% (mono)
- Channel separation 32 dB at 1 kHz
- Frequency response 30-16000 Hz

MW
- Frequency range 530-1710 kHz
- External antenna connection

IPOD/IPHONE COMPATIBILITY
- iPhone 5 to XS (Lightning USB cable required)
- iPhone 3G to 4s (30-pin USB cable required)
- iPod touch 2G to 3G (30-pin USB cable required)
- iPod nano 3G to 6G (30-pin USB cable required)
- iPod Classic 80-160GB (30-pin USB cable required)

GENERAL DATA
- Dimensions of radio base unit: 101 x 51 x 136 mm
- Power supply: 10.5 to 14.4 volts
- Maximum current draw: 15 amps
- Standby current: 3.5 mA
- Output power: 12V, 4 ohms, <1% THD: 4 x 15 watts RMS
- Speaker impedance: 4-8 ohms
- RCA outputs: 6 channels, 2.85 volts for external amplifiers (front/rear/subwoofer)
- Input sensitivity AUX1 > 300 mV / 6 kOhms
- Input sensitivity AUX2 > 300 mV / 6 kOhms

LEGAL NOTICE
iPod and iPhone are trademarks of Apple Computer, registered in the U.S. and other countries. To achieve optimal results, Apple has established certain compatibility requirements for accessory manufacturers. Products designed and certified to be compatible will have the "Made for" marking on their packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories labeled "Made for" your device (see below). "Made for iPod" means that an electronic accessory is specifically designed for connection to the iPod and has been certified by the developer to meet Apple performance standards. "Made for iPhone" means that an electronic accessory is specifically designed for connection to the iPhone and has been certified by the developer to meet Apple performance standards. E-approval - E-approval e13 03 10006 e13*72/245*2006/96*10006*00 VEHICLES WITH 6-VOLT ELECTRICAL SYSTEMS You will need a voltage converter if you are installing a RetroSound car radio in a vehicle with a 6-volt electrical system. If you wish to operate your car radio on a 6-volt electrical system, we recommend the Statron DC/DC converter 2238.0 (www.statron.de).
*IMPORTANT NOTE
Please order a vehicle-specific front panel with control knobs for your car separately. This is not included with the car radio.