Retrosound San Diego with DAB+, chrome

The new "San Diego" is RetroSound's first car radio with DAB+ radio, Bluetooth hands-free calling, A2DP audio streaming, and Apple iPod/iPhone control. The new push-button operation is a true breakthrough in sound systems for classic cars. Naturally, the "San Diego" also features RetroSound's flexible, patented "InfiniMount" mounting system and control knobs. With this single device, you retain the classic car's design without sacrificing modern digital media. Two USB and two AUX inputs on the rear panel allow you to connect external MP3 players, such as an iPod or DAB+ receiver. Any concerns that installing a RetroSound car radio might jeopardize your historic vehicle registration are unfounded. There is confirmation, with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ), stating that the RetroSound "Zuma" and RetroSound "San Diego" models, including vehicle-specific bezels and control buttons, may be installed in classic cars with H-plates and will not prevent the issuance of H-plates!

VERSION
Chrome-plated display with chrome-plated pushbuttons (without front bezel, without control buttons*)

FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Available in authentic pushbutton styling in ivory, chrome, or black
- Apple iPod/iPhone control
- Bluetooth hands-free calling with A2DP audio streaming
- Adjustable LCD backlighting with 32,000 different colors
- Switchable radio frequencies (USA/EUROPE)
- New control system with knob and ring functionality
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- Three pairs of RCA outputs for external amplifiers
- Patented "InfiniMount" mounting system and control knobs
- Compatible with all RetroSound front panels and control knobs
- 3 equalizer presets plus individual bass/treble/fader/balance adjustment
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00
- XBAS loudness function
- Auto reset to factory settings after 5 minutes Powerless

EXPANSION OPTIONS
- 2 USB inputs (rear of unit)
- 2 AUX inputs (stereo)
- 3 RCA outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate power-on lead for motorized antenna and amplifier

TECHNICAL DATA

FM
- European Broadcast frequency range with RDS 87.5-107.9
- External antenna connection
- Sensitivity 12.5 dBf
- Station separation 75 dB at 400 kHz
- Signal-to-noise ratio 62 dB
- Distortion at 1 kHz 0.8% (stereo) 0.5% (mono)
- Channel separation 32 dB at 1 kHz
- Frequency response 30-16000 Hz

MW
- Frequency range 530-1710 kHz
- External antenna connection

IPOD/IPHONE COMPATIBILITY
- iPhone 5 to XS (Lightning USB cable required)
- iPhone 3G to 4s (30-pin USB cable required)
- iPod touch 2G to 3G (30-pin USB cable required)
- iPod nano 3G to 6G (30-pin USB cable required)
- iPod classic 80-160GB (30-pin USB cable required)

GENERAL DATA
- Control unit dimensions 89x38x27mm
- Radio base unit dimensions 101x51x136mm
- Power supply 10.5 to 14.4 Volts
- Maximum current draw 15 Amps
- Standby current 3.5 mA
- Output power 12V, 4 Ohms, <1% THD: 4x15 Watts RMS
- Speaker impedance 4-8 Ohms
- RCA outputs 4 channels 2.85 Volts
- Input sensitivity AUX1 > 300 mV / 6 kOhms
- Input sensitivity AUX2 > 300 mV / 6 kOhms

LEGAL NOTICE
iPod and iPhone are trademarks of Apple Computer, registered in the U.S. and other countries. For best results, Apple has established certain compatibility requirements for accessory manufacturers. Products designed and certified to be compatible will have the "Made for" marking on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device To ensure compatibility, look for accessories labeled "Made for" your device (see below).
"Made for iPod" means that an electronic accessory is specifically designed for connection to the iPod and has been certified by the developer to meet Apple performance standards.
"Made for iPhone" means that an electronic accessory is specifically designed for connection to the iPhone and has been certified by the developer to meet Apple performance standards.

VEHICLES WITH 6-VOLT ELECTRICAL SYSTEMS
You will need a voltage converter if you want to operate a RetroSound car radio in a vehicle with a 6-volt electrical system. We recommend the Statron DC/DC converter 2238.0 (www.statron.de) in such cases.

E-APPROVAL
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00

*IMPORTANT NOTE
Please order a vehicle-specific front panel with control knobs for your car separately. This is not included with the car radio.