Mercedes-Benz Vito (447) with standard sound system | 5-channel DSP sound upgrade | Freestanding subwoofer

5-channel upgrade amplifier with DSP, including mounting accessories and plug-and-play wiring harness for Mercedes-Benz V-Class (447) minivans and panel vans.

Do you own a Mercedes-Benz V-Class with a standard sound system and want to improve the sound without dismantling the entire vehicle? Here's the solution: a high-quality plug-and-play amplifier with DSP that unlocks unprecedented sound and performance from your vehicle's original speaker system!

The set comes ready to install with a pre-assembled plug-in wiring harness (which is spliced into the factory wiring harness) and a pre-loaded, vehicle-specific high-power sound setup. Also included is a small, powerful down-firing bass-reflex subwoofer, which can be placed freestanding, for example, between the seats, to provide the necessary bass foundation. It is stable and robust, and easily walkable.

The set is also easy to install for inexperienced installers!

You can find the installation tutorial (with subwoofer under the driver's seat) here: https://youtu.be/Jl-JTcS5N78

Match M5.4 DSP: Concentrated power in a handbag format!
Barely larger than a smartphone, but with the performance of a true giant! With an almost unbelievable 360/720 watts RMS/max. output power and five amplifier channels, many a speaker will break a sweat! Such power in such a compact space is only possible thanks to Audiotec Fischer's proprietary Class HD technology, which guarantees sensational efficiency and therefore minimal heat generation. This opens up unprecedented possibilities when choosing the installation location. This plug-and-play amplifier fits behind the glove compartment in most vehicles, minimizing installation effort and eliminating long cable runs!

Features:

• Highly efficient 5-channel Class HD amplifier with integrated 7-channel DSP
• Minimal dimensions for space-saving and concealed installation concepts
• Minimal heat generation thanks to maximum efficiency
• Latest generation 32-bit AD and DA converters
• Two power options: "HighPower" mode for maximum performance and "MidPower" mode with reduced output power and lower current consumption for plug-and-play installations. Play Applications
• Extremely powerful "Fixed Point" audio DSP with 64-bit resolution
• Optical SPDIF input with a sampling rate between 12 and 96 kHz
• Intelligent high-level input with ADEP.3 circuitry and automatic turn-on, therefore no "remote" from the car radio is required
• Start-stop capability down to 6 V supply voltage

• RMS / Max. Power

- @ 4 Ohm High-Power mode: 4 x 60 / 120 Watts (Front/Rear channels)
- Subwoofer output at 4 Ohm High & Mid-Power mode: 1 x 90 / 180 Watts
- Subwoofer output at 2 Ohm High & Mid-Power mode: 1 x 160 / 320 Watts

• Amplifier Technology Class HD
• Input Sensitivity 11.2 Volts via High-Level Speaker Input
• Input Impedance High-Level 9 - 33 Ohms with ADEP.3
• Outputs 5 x Speaker Outputs
• Frequency Range 20 Hz - 20,000 Hz
• DSP Resolution 64 Bits
• DSP Processing Power 295 MHz (1.2 Billion MAC Operations/Second)
• Sampling Rate 48 kHz
• DSP Type Audio Signal Processor
• Signal Converter Asahi Kasei 24 Bits
• Signal-to-Noise Ratio Analog Input > 99 dB (A-weighted)
• Total Harmonic Distortion (THD) < 0.03%
• Damping factor > 50
• Operating voltage 10.5 volts (max. 5 sec. down to 6 volts)
• No-load current consumption 280 mA
• Dimensions (H x W x D) 35 x 85 x 110 mm

Subwoofer:

• Stable down-firing subwoofer enclosure made of multiplex for freestanding mounting, 450 x 250 x 150 mm (L x W x H incl. feet)
• 20 cm subwoofer driver with 2 ohm impedance
• 300/600 W RMS/peak power handling
• Bass reflex enclosure principle
• Despite small dimensions, low frequency response
• Plug & Play connection