Audi Q3 (F3) with Audi sound system (ASS) | 8-channel DSP sound upgrade | Subwoofer Bold 6

Upgrade amplifier with DSP, vehicle-specific subwoofer upgrade, mounting accessories, and plug-and-play wiring harness for Audi Q3 (f3) and Audi Q3 Sportback, for vehicles with ASS (Audi Sound System). Do you have a leased vehicle and want to improve the sound of the standard system, but don't want to dismantle the entire vehicle? Here's the solution: a modern, high-quality 8-channel plug-and-play amplifier with DSP (Digital Sound Processor) that unlocks previously unimagined sound and performance from your vehicle's original speaker system. A replacement subwoofer significantly enhances the bass response, the DSP corrects the sound, and the high-power amplifier channels deliver ample power. This creates a dynamic sound image, powerful bass and clear mids and highs!

The set comes with a ready-made plug-in cable set (which is spliced into the factory cable set) and with a pre-installed high-power sound setup. Even for inexperienced installers, installation takes less than three hours!

Scope of delivery:

• DSP amplifier MATCH UP8
• Vehicle-specific mounting plate
• Replacement subwoofer chassis Bold 6, ready to connect
• Plug & Play wiring harness
• Power supply connection
• Subwoofer connection cable
• Special tools

You can find the installation tutorial here: https://www.youtube.com/watch?v=bLYWuRRkxYA&t=1087s

Pure power in Handy format:
The Match Up8 DSP is smaller than an A5 sheet of paper, but as powerful as a true giant! With an almost unbelievable 650/1300 watts RMS/max. output power and eight amplifier channels, it'll make many a loudspeaker sweat! Such power in such a compact space is only possible thanks to Audiotec Fischer's proprietary Class HD technology, which guarantees sensational efficiency and therefore minimal heat generation. This opens up unprecedented possibilities when choosing the installation location. This plug-and-play amplifier fits behind the glove compartment in most vehicles, minimizing installation effort and eliminating long cable runs!

Features:

• Extremely powerful 64-bit "Fixed Point" Audio DSP
• ACO – Advanced 32-bit Co-Processor platform for extended functionality
• ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
• Proprietary TuneEQ function for automated adjustment of the output equalizers
• SFX sound effects – Augmented Bass Processing, RealCenter & Intelligent 6-channel high-level input with ADEP.3 circuitry. 1-to-1 channel routing option (IOR) in conjunction with the optional MEC ANA-LOG IN module – same number of high-level inputs and amplifier channels. VCP (Virtual Channel Processing) allows for even more flexible configuration of highly complex sound systems. MEC slot for system expansions such as Bluetooth® HD audio streaming, high-resolution audio streaming via USB, etc. Optical SPDIF input with a sampling rate between 12 and 96 kHz. Mono RCA output for connecting additional amplifiers, e.g., a subwoofer amplifier. SCP (Smart Control Port) for optional accessories such as DIRECTOR, CONDUCTOR, etc. Co.
• Auto Remote Switch
• Start-stop capability down to 6 volts supply voltage
• Extremely compact dimensions and low heat generation thanks to very high efficiency

• RMS / Max. Power

- Output power at 4 ohms: 5 x 65 / 130 watts (front/rear/center)
- Subwoofer output at 2 ohms: 2 x 160 watts RMS

• Amplifier technology Class HD
• Input sensitivity 11.2 volts via high-level speaker input
• Input impedance high-level 13 ohms
• Outputs 7 x speaker outputs
• Frequency range 20 Hz - 20,000 Hz
• DSP resolution 64 bits
• DSP processing power 295 MHz (1.2 billion MAC operations/second)
• Sampling rate 48 kHz
• DSP type Audio signal processor
• Signal converter Burr-Brown
• Signal-to-noise ratio analog input > 105 dB (A-weighted)
• Total harmonic distortion (THD) < 0.03%
• Damping factor > 100
• Operating voltage 10.5 volts (max. 5 seconds down to 6 volts)
• No-load current consumption 450 mA
• Dimensions (H x W x D) 45 x 130 x 153mm

Ampire Bold 6 with multiplex adapter ring

• Dual Voice Coil subwoofer chassis
• Nominal diameter: 165mm
• Impedance: 4 + 4 ohms
• Steel sheet basket
• 1.5"/38mm double voice coil
• Poly carbon membrane
• Vented centering spider
• 8mm X-max.
• Ultra Low Bass Technology
• Pe 125/250 Watt power handling