AMPIRE Smartphone Monitor 25.4cm (10'') with AHD Dual Dashcam and Rearview Camera Function

Do you want to retrofit Apple CarPlay or Android Auto to your factory-installed car radio without a monitor? Then the CPM101 smartphone monitor is exactly the right product. This high-resolution 10" touchscreen monitor allows you to integrate your smartphone into almost any vehicle and also displays an optional reversing camera. Our CPM101 smartphone monitor with integrated smartphone interface is compatible with wireless Apple CarPlay® and Android Auto (please note the minimum requirements), making it a smart and safer way to use your smartphone in the car. Everything is controlled via the intelligent voice control Siri or Google Assistant, or directly on the 10" touchscreen monitor, which you can securely mount on the dashboard, for example, using the included stand. Everything you want to do with your smartphone while driving can be done directly on this monitor using Apple CarPlay® or Android Auto. You can easily get directions or send and receive messages. If your vehicle has a factory-installed Bluetooth hands-free system, you can use it to make calls via our smartphone integration. While navigating, you can listen to your favorite music, for example via Spotify, or your favorite radio station. Radio app – and still keep your focus on the road.

Simply connect your smartphone wirelessly to our monitor via WiFi and you're ready to go. Audio playback is fed in via the audio AUX input (3.5mm jack) of your factory-installed car radio. If your vehicle has factory-installed Bluetooth A2DP audio streaming, you can also send the audio from the CPM101 directly to your radio via Bluetooth without any detours or loss of quality. Alternatively, an FM transmitter is also integrated, which can send the audio as an FM signal and be received by your car radio. A small speaker is also integrated into the housing, which can, for example, play navigation instructions.

TECHNICAL DATA

DISPLAY
- 10" IPS LCD Touch Screen Monitor
- 9.2" / 23.4cm visible diagonal
- Aspect ratio 24:9
- Touchscreen Operation
- Adjustable LED backlight
- Extremely high resolution of 1600 x 600
- Brightness 750 cd/m²
- Contrast 1000:1
- Refresh rate 60 Hz
- Vertical viewing angle 130°
- Horizontal viewing angle 150°
- Our monitors comply with ISO 9241-307, pixel defect class II

SMARTPHONE INTEGRATION
Wireless Apple CarPlay
Minimum requirement: iPhone 5 and later. The CPM101 can only connect wirelessly to Apple CarPlay, not via a USB cable.

Wireless Android Auto
Minimum requirements: Android 11, Android Auto 4.8 and 5GHz Wi-Fi*
*IEE Standards 802.11a, 802.11ac, 802.11ax, 802.11be & 802.11n
ATTENTION! Devices that only have 2.4GHz Wi-Fi are not supported and are not compatible!
The CPM101 can only be connected wirelessly to Android Auto and not via a USB cable.

Bluetooth
Pair your smartphone with the CPM101 and then connect your smartphone to your car radio's Bluetooth. The CarPlay or Android Auto audio will then be sent directly from your smartphone to the car radio* via Bluetooth A2DP.
(*Requires a Bluetooth A2DP-enabled car radio.)

AHD Dual Dashcam
Integrated front camera on the back of the monitor
- Analog High Definition
- Parking mode with motion detection and time-lapse recording. 12h or 24h adjustable, undervoltage protection at 11.8V.
- Memory card type: microSD (not included).
- microSD speed class: Class 10 or higher.
- microSD storage capacity: min. 32GB to max. 256GB.
- Recording capacities: 32GB approx. 4.5 hrs, 64GB approx. 9.5 hrs, 128GB approx. 19 hrs, 256GB approx. 38 hrs, after which the oldest recordings are overwritten.
- Power-on delay (ACC ON): 17 seconds.
- Power-on delay in parking mode: 0 seconds.
- Power-off delay (ACC OFF): 15 seconds.

REARVIEW CAMERA
- The system's rear camera is used as the reversing camera. No additional reversing camera installation is necessary.
- 12-volt switching input for activation
- Instant switching to the system's rear camera in full screen with guidelines when reverse gear is engaged
- Guidelines individually adjustable
- 3-second switch-off delay when reverse gear is disengaged
- Dashcam recording function is not interrupted in reversing camera mode
- Image playback adjustable (normal/mirrored)

AUDIO OUTPUT
- Stereo audio output with 3.5mm jack cable
- Bluetooth A2DP audio streaming of all CarPlay and Android Auto content directly from your smartphone. No additional app required.
- FM transmitter for alternative audio playback (87-108 MHz)
- Integrated 2-watt speaker with its own housing
/>
OTHER
- LINUX 4.9 OS operating system with 1GB of storage
- Apple CarPlay and Android Auto in full-screen mode, or in half-screen mode with simultaneous display of a camera (selectable)
- SD card reader (Micro SD)
- USB-C input for power supply
- USB-C cable power supply with ACC ignition logic
- Menu languages: DE, EN, FR, ESP, RU, JPN, CN, KOR
- Automatic power-on when operating voltage is applied
- Operating voltage 9V - 36V DC
- Current consumption ACC ON: 600mA@12VDC
- Current consumption ACC OFF: 8.1mA@12VDC
- Current consumption in parking mode: 290mA@12VDC
- Operating temperature: -20° to 70°C
- Storage temperature: -30° to 80°C
- Monitor dimensions (without stand): 240 x 100 x 33 mm (42 mm with front camera)
- System rear camera dimensions: 23 x 23 x 32 mm
- Monitor weight with stand: 518 g

Scope of delivery
- 10" (25.4 cm) touchscreen monitor
- Stand mount
- USB-C power cable with +12V, ground and ignition (ACC), 320 cm
- AHD system rear camera, 1080p, with butterfly mount and 50 cm cable
- Connection cable for system rear camera, 700 cm
- Connection cable for audio output (3.5 mm jack), 120cm

OPTIONAL ACCESSORIES
AK1023 Extension cable for the reversing camera
MICRO-SD32G-SANDISK-MAX 32GB memory card