AMPIRE KCR802 | Color reversing camera, surface-mounted with 120° wide-angle lens

OPERATING INSTRUCTIONS
When cleaning your vehicle, avoid direct contact with pressure washers. Tighten the mounting nut by hand only to prevent the hollow thread from breaking. Do not mount the camera on the front of the vehicle, as the glass lens could be damaged by road debris from vehicles ahead. The camera is not suitable for continuous operation or surveillance. Connecting it to the ignition (K15) will cause overheating. Avoid overstretching the connection cable during installation.

The KCR802-NTSC surface-mount camera is a reversing/surveillance camera with unlimited applications in cars, buses, motorhomes, trucks, or trailers. The aluminum housing is weatherproof, waterproof, and very robust. Optional guidelines can be overlaid on the video signal to assist the viewer with parking. The camera comes complete with a 7-meter connection cable with high-quality copper strands. Also included is a 5° angled rubber base to adjust the camera's viewing angle to the installation situation.

TECHNICAL DATA
- Guide lines: factory off (can be switched on)
- Black aluminum housing
- Mirrored image display (can be switched on)
- Image sensor type: 1/4'' Color CMOS (PC7070)
- Video signal: NTSC
- Resolution: 648,488 pixels
- DIN protection class: IP67
- Resolution: 420 TV lines
- Exposure time: 1/50-60~1/15,000 seconds
- Signal-to-noise ratio: 48 dB
- Dynamic range: >70 dB
- Light sensitivity: < 0.2 Lux
- Output signal 1.0Vp-p, 75 OHM
- Automatic white balance
- Automatic level adjustment
- Operating voltage 12 Volts DC 10%
- Power consumption 800mW
- Operating temperature -40°C ~ +80°C
- Diagonal viewing angle 170°
- Horizontal viewing angle 120°
- Camera dimensions 32x34mm and 25mm high
- Mounting hole 7.5mm
- 7m video cable (100% copper)
- RCA video connector (male)
- RoHS and E certified.

SETTINGS
The new KCR802-NTSC is now able to display the video image in four different views.
#1 Mirrored image for surface mounting (factory setting)
#2 Mirrored image for surface mounting with guidelines (cut brown cable loop)
#3 Normal image for surface mounting (cut blue cable loop)
#4 Normal image for surface mounting with guidelines (cut blue and brown cable loops)

PACKAGE CONTENTS
1x KCR802-NTSC camera
1x 7-meter video cable (RCA male/RCA male)
1x Adapter cable to RCA (0.52m) / power cable (2.5m)
1x Foam gasket (self-adhesive)
1x Angled rubber pad (5° angle)
1x Installation instructions (German/English)

IMPORTANT NOTES
- Pull the Tighten the fastening nut only by hand to prevent the copper hollow thread from breaking.

APPROVALS
- CE Directive of 2004/108/EC, EN55022: 2010, EN 55024: 2010 Report No. STR12058091E
- RoHS Directive 2011/65/EU Report No. STR12058093R
- FCC Part 15B Report No. STR12058092E-3

LEGAL NOTICE
An increase in vehicle dimensions, except for passenger cars and motorcycles, requires registration and must be inspected immediately by a technical inspection agency or an officially recognized inspection organization (DEKRA, GTÜ, KÜS, TÜV). Before installing or modifying any equipment, consult an officially recognized expert for motor vehicle traffic or a testing engineer from a vehicle inspection organization to determine whether the vehicle's operating permit will be affected or whether the modification is even permissible. Used cameras cannot be returned for a credit note.