Ampire BTR-100 Bluetooth receiver

AMPIRE Bluetooth Receiver with Auto-Remote Function
- Waterproof, Marine Certified
- Automatic Power-On
- Automatic Remote Output
- QDL Licensed Bluetooth 4.0 CRS I9 Chip
- RCA Connectors with 1.0V Signal Output
- SSID Display Name: BTR100

CONNECTIONS
- Blue: Remote Output +12V/20mA
- Red: +12V Ignition (ACC) Fuse 2A
- Black: Ground
- RCA Connectors: Red = Right, White = Left

TECHNICAL DATA
- Voltage: 12V DC
- Current Consumption: 40mA max.
- Bluetooth 4.0
- Frequency Range: 20Hz-20kHz
- Output Voltage: 1V RMS

PAIRING THE DEVICE
- Make sure Bluetooth is enabled on your device.
- Turn on the ignition.
- The LED (6) will flash blue (pairing mode).
- To connect, select BTR100 in your device's Bluetooth menu.
- After a successful connection, the LED will light up continuously and a single beep will sound through the audio system.

NOTE
- Multiple devices can be connected to the BTR100, but only one device can stream music at a time.
- The BTR100 always remembers the last paired device and will connect automatically after being switched on. A connection to another device must be established manually, as described above.
- If the connected device is out of range for more than one minute, the connection will be automatically interrupted and the BTR100 will enter pairing mode [the LED (6) will flash].

OPERATION
- All settings, such as volume, music selection, and play/pause, are made on your device.
- The BTR100 can be installed out of sight, as it has no controls or buttons that need to be operated.