MATCH M 5.4 DSP amplifier

Smallest DSP 5-channel amplifier with enormous output power and superior sound. Thanks to maximum efficiency through digital technology, this upgrade amplifier can also be operated with factory wiring that has a minimum cross-section of 2.5 mm².

Thanks to its minimal dimensions and very high efficiency, this amplifier can also be installed in locations inaccessible to other products.

RMS / Max. Power
- @ 4 Ohms

High-Power mode: 4 x 60 / 120 watts (front/rear channels)

Mid-Power mode: 4 x 35 / 70 watts (front/rear channels)

- Subwoofer output at 4 ohms High- & Mid-Power mode: 1 x 90 / 180 watts
- Subwoofer output at 2 ohms High- & MidPower Mode: 1 x 160 / 320 Watts
Amplifier Technology Class HD
Inputs 4 x High-Level Speaker Inputs
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In
Input Sensitivity 5 - 11.2 Volts
Input Impedance RCA -
Input Impedance High-Level 9 - 33 Ohms with ADEP.3
Outputs 5 x Speaker Outputs
1 x Line Out (3.5mm stereo jack)
1 x Remote Out
Output Voltage RCA 3 Volts RMS
Frequency Range 20 Hz - 20,000 Hz
DSP Resolution 64 Bits
DSP Processing Power 295 MHz (1.2 billion MAC operations/second)
Sampling Rate 48 kHz
DSP Type Audio Signal Processor
Signal Converter A/D: Burr-Brown, D/A: Burr-Brown
Signal-to-noise ratio digital input > 105 dB (A-weighted)
Signal-to-noise ratio analog input > 99 dB (A-weighted)
Total harmonic distortion (THD) < 0.03%
Damping factor > 50
Operating voltage 10.5 volts (max. 5 sec. down to 6 volts)
No-load current consumption 280 mA
Max. Remote output current 500 mA
Fuse 1 x 30 A Maxi plug-in fuse (FK3)
Additional features: 32-bit coprocessor, ADEP.3 circuit, auto remote switch, control input, stereo line out, start-stop capability, USB
Dimensions (H x W x D) 35 x 85 x 110 mm