- Product number:: 33862030 |
- EAN: 4057204336653 |
- Manufacturer: Audiotec Fischer
Maximum Bass Performance, Minimal Height
The HELIX IK ES10.1-DVC2 combines powerful deep bass with an exceptionally flat cabinet design. Specifically developed for concealed installation locations such as the double cargo floor in the trunk, it delivers impressive bass performance and sound dynamics – even where other subwoofers simply won't fit.
Clever Down-Firing Design
The clever down-firing design ensures even bass distribution throughout the entire interior. The vehicle floor acts as an acoustic reflector, intensifying the low-frequency effect, protecting the speaker, and allowing for a flatter design. Combined with bass-reflex technology and the powerful 250 mm driver, this creates a punchy bass experience with impressive dynamics – all while making efficient use of space.
Powerful Sound Through Sophisticated Details and High-Quality Components
With extremely flat cabinet designs, intelligent construction solutions are essential to effectively prevent disruptive vibrations. In the IK ES10.1-DVC2, the subwoofer's magnet system is screwed directly to the rear panel of the cabinet, thus providing additional bracing. The cabinet houses the exceptionally slim 250 mm IK S10-DVC2 driver with a high-power dual voice coil and an extremely rigid sandwich paper cone. This combination effortlessly converts amplifier power into rich sound pressure while simultaneously delivering precise reproduction of the finest bass nuances. Flexible Connection: The dual voice coil woofer design offers considerable flexibility in terms of amplifier choice. Whether 1 x 4 ohms, 2 x 2 ohms, or 1 x 1 ohm impedance – every configuration is possible with these deep bass specialists. Robust, well-designed, and easy to install. The housing, covered in durable needle felt with an embroidered HELIX logo, is not only visually appealing but also robust enough for everyday use. The feet with Velcro straps guarantee a secure hold in the vehicle. The pluggable screw terminal significantly simplifies installation – and allows for quick removal of the subwoofer, for example, if more space is needed. The detachable connector reliably protects against short circuits, as no open cable ends remain in the vehicle.
Features
- Downfire enclosure technology for ideal bass distribution in the vehicle and perfect speaker protection
- Extremely flat bass reflex enclosure for maximum sound pressure and space-saving installation in the vehicle
- Powerful 250 mm driver with sandwich paper cone for rich, deep bass
- Magnet system with rear panel screwed in for additional stiffening to stabilize and reduce enclosure vibrations
- Plugable screw terminal allows quick and secure installation and removal
- Voice coil configuration selectable via connection terminal – 2 x 2 ohms, 1 x 4 ohms or 1 x 1 ohm
- Feet with Velcro straps for secure placement in the vehicle
- Durable needle felt covering with embroidered HELIX logo
Technical data
| IK ES10.1-DVC2 - 2 x 2 Ohm | ||
| Load capacity RMS | P | 300 Watt |
| Recommended amplifier power | RMS | 150 - 300 W |
| Impedance | z | 2 x 2 Ω / 1 x 4 Ω / 1 x 1 Ω |
| Max. linear diaphragm stroke | Xmax | +/- 6.0 mm |
| Tunnel tuning frequency | Fb | 37 Hz |
| Efficiency 1 W / 1 m | SPL | 91 dB @ 2.83V / 1m 88 dB @ 1W / 1m |
| Dimensions (H x W x D) | 135 x 725 x 350 mm | |
| Built-in subwoofer driver | HELIX IK S10-DVC2 | |
| Recommended DSP settings | "Self-Define" high-pass filter 37 Hz / Q = 1.2; EQ filter 95 Hz / Q = 0.7 / -3 dB |
Scope of delivery
1 x Down-firing enclosure subwoofer IK ES10.1-DVC2
1 x Datasheet
Similar Products

















