AMPIRE KCN-802 Color Reversing Camera, Undermount

The KCN802 under-mount camera is a reversing/surveillance camera with unlimited applications in cars, buses, motorhomes, trucks, or trailers. The aluminum housing is weatherproof, waterproof, and very robustly constructed. Optional guidelines can be overlaid on the video signal to assist the viewer with parking. The camera comes complete with a 7-meter connection cable with high-quality copper strands. A 5° angled rubber mounting pad is also included to adjust the camera's viewing angle to the installation situation.

TECHNICAL DATA
- Guide lines: factory off (can be switched on)
- Black painted aluminum housing
- Image display mirrored (adjustable)
- Image sensor type 1/3'' Color CMOS (PC3089N)
- Video signal NTSC
- Resolution 756504 pixels (effective)
- Resolution 480 TVL lines
- Exposure 1/50-60~1/15000 seconds
- Signal-to-noise ratio = 46.5dB
- Dynamic range > 60.7dB
- Light sensitivity < 0.2 Lux
- Output signal 1.0Vp-p, 75 OHM
- Automatic white balance
- Automatic level adjustment
- Operating voltage 12 Volts DC 10%
- Power consumption 800mW
- Operating temperature CMOS chip -40°C ~ +105°C
- Diagonal viewing angle 170°
- Horizontal viewing angle 120°
- DIN protection class IP67
- Camera dimensions 32 x 35 x 25mm
- Mounting hole 7.5mm
- Packaging dimensions 15.5 x 8.0 x 5.5cm
- 7m video cable (100% copper)
- RoHS and E certified.

SETTINGS
The new The KCN802 is now able to display the video image in four different views.
#1 Mirrored image for under-cabinet mounting (factory setting)
#2 Mirrored image for under-cabinet mounting with guidelines (cut brown cable loop)
#3 Normal image for under-cabinet mounting (cut blue cable loop)
#4 Normal image for under-cabinet mounting with guidelines (cut blue and brown cable loops)

SCOPE OF DELIVERY
1x Camera KCN802
1x Video cable 7 meters (RCA plug/RCA plug)
1x Adapter cable to RCA (0.52m) / power cable (2.5m)
1x Foam gasket (self-adhesive)
1x Angled rubber pad (5° angle)
1x Installation instructions (German/English)

IMPORTANT NOTES
- Avoid during the Vehicle cleaning: Avoid direct contact of the camera lens with high-pressure cleaners.
- Do not install the camera on the front of the vehicle, as the glass lens could be damaged by road debris from vehicles ahead.
- The camera is not suitable for continuous operation or surveillance. It must not be operated with the ignition (K15) on, as this could damage the camera due to overheating.

- When installing/routing the cables, avoid overstretching the connection cables. This could result in a broken cable.

APPROVALS
- CE Directive 2004/108/EC, EN55022: 2010, EN 55024: 2010 Report No. STR12058091E
- RoHS Directive 2011/65/EU Report No. STR12058093R
- FCC Part 15B Report No. STR12058092E-3

LEGAL NOTICE
An increase in vehicle dimensions, except for passenger cars and motorcycles, requires registration and must be inspected immediately by a technical inspection agency or an officially recognized inspection organization (DEKRA, GTÜ, KÜS, TÜV). Before installation or modification, consult an officially recognized expert for motor vehicle traffic or a testing engineer from an inspection organization to determine whether the vehicle's operating permit will be affected or whether the modification is even permissible. Used cameras cannot be returned for credit.

The KCN802-NTSC is the successor to the KC802, KC801, and KCL801 cameras. The cameras have identical and interchangeable wiring.