Mosconi HLA-Slim Hi/Lo adapter with remote detection

High Low Adapter

• No unnecessary housing, therefore extremely small and flat. Fits even in confined spaces.
• 100mA remote output power
• Almost double the signal input load capacity compared to conventional adapters

Note:
HLA-Slim / Dual generates a usable and stable switching voltage exclusively with car radios or factory amplifiers equipped with output stages based on the BTL principle.

Technical Data:

• Standby current <0.8mA, Current consumption in operation < 15mA (<30mA in the dual version)
• Reverse polarity protection
• Maximum current at remote output: 100mA
• Minimum load at remote output: 120 ohms
• Remote output is short-circuit protected; max. short-circuit duration: 10 seconds
• Distortion: <0.01%
• Slew rate: 10V/µs
• Signal-to-noise ratio: >100dB
• Channel separation: > 60dB Attenuation: 4:1 V/V High-level input load: 45 ohms, 2 watts Maximum input power: 50 W per channel Max. output signal @ THD <0.1% 3.2 Vrms Min. output impedance 2 kOhms