Car radio for Ford Mustang 1967-73 with DAB+, USB and Bluetooth Retrosound San Diego

The new "San Diego" is RetroSound's first car radio with DAB+, Bluetooth hands-free calling, A2DP audio streaming, and Apple iPod/iPhone control.

Supplied with a mounting bezel and a set of knobs for the Ford Mustang (1967-1973).

Any concerns that installing a RetroSound car radio might jeopardize your historic vehicle registration (H-plate) are unfounded. Confirmation from the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) states that the RetroSound "Model Hermosa," "Model Classic," and the RetroSound "San Diego," including the vehicle-specific bezel and control knobs, may be installed in classic cars with historic vehicle registration and will not prevent the issuance of such registration!

FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Available in authentic push-button styling in ivory, chrome, or black
- Apple iPod/iPhone control
- Bluetooth hands-free calling with A2DP audio streaming
- Adjustable LCD backlight with 32,000 different colors
- FM/AM radio receiver with RDS and 30 station presets
- Switchable radio frequencies (USA/EUROPE)
- New control system with knob and ring functionality
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- Three pairs of RCA outputs for external amplifiers
- Patented "InfiniMount" mounting system and control knobs
- Compatible with all RetroSound front panels and control knobs
- 3 equalizer programs plus individual bass/treble/fader/balance settings
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00
- XBAS loudness function
- Auto reset to factory settings after 5 minutes without power
- The radio comes with plastic control knobs. Metal control knobs can be purchased separately.

EXPANSION OPTIONS
- 2 USB inputs (rear of unit)
- 2 AUX inputs (stereo)
- 3 RCA outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate power-on lead for motorized antenna and amplifier

TECHNICAL DATA

FM
- European Broadcast frequency range with RDS 87.5-107.9 MHz
- External antenna connection
- Sensitivity 12.5 dBf
- Station separation 75 dB at 400 kHz
- Signal-to-noise ratio 62 dB
- Distortion at 1 kHz 0.8% (stereo) 0.5% (mono)
- Channel separation 32 dB at 1 kHz
- Frequency response 30-16000 Hz

MW
- Frequency range 530-1710 kHz
- External antenna connection

IPOD/IPHONE COMPATIBILITY
- iPhone 5 to XS (Lightning USB cable required)
- iPhone 3G to 4s (30-pin USB cable required)
- iPod touch 2G to 3G (30-pin USB cable required)
- iPod nano 3G to 6G (30-pin USB cable required)
- iPod classic 80-160GB (30-pin USB cable required)

GENERAL DATA
- Control unit dimensions 89x38x27mm
- Dimensions of radio base unit 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum current draw 15 amps
- Standby current 3.5 mA
- Output power 12V, 4 ohms, <1% THD: 4x15 watts sine wave
- Speaker impedance 4-8 ohms
- RCA outputs 4 channels 2.85 volts
- Input sensitivity AUX1 > 300 mV / 6 kOhms
- Input sensitivity AUX2 > 300 mV / 6 kOhms

LEGAL NOTICE
iPod and iPhone are trademarks of Apple Computer, registered in the U.S. and other countries. For best results, Apple has established certain compatibility requirements for manufacturers of Accessories are created. Products designed and certified as compatible will have the "Made for" label on their packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories labeled "Made for" your device (see below).
"Made for iPod" means that an electronic accessory is designed specifically for connection to the iPod and has been certified by the developer to meet Apple performance standards.
"Made for iPhone" means that an electronic accessory is designed specifically for connection to the iPhone and has been certified by the developer to meet Apple performance standards.

E-APPROVAL
- E-Approval e13 03 10006 e13*72/245*2006/96*10006*00